In the Remote IP section, from the Choose Type drop-down list, select Network IPv4.This is the local network protected by the Firebox. In the Network IP text box, type the local IP segment.In the Local IP section, from the Choose Type drop-down list, select Network IPv4.From the Gateway drop-down list, select the gateway that you added.The Branch Office VPN Tunnel configuration interface appears.
For all other Phase 1 settings, keep the default values.From the Version drop-down list, select IKEv2.In the Gateway Endpoint section, select the Start Phase 1 tunnel when Firebox starts check box.In the adjacent text box, type the public IP address of your Check Point connection.In adjacent text box, type the primary IP address of the External Firebox interface.The Primary Interface IP Address is the primary IP address you configured on the selected external interface. From the Interface IP Address drop-down list, select Primary Interface IP Address.From the External Interface drop-down list, select External.In the Gateway Endpoint section, click Add.In the adjacent text box, type the pre-shared key.In the Credential Method section, select Use Pre-Shared Key.From the Address Family drop-down list, select IPv4 Addresses.In the Gateway Name text box, type a name to identify this Branch Office VPN gateway.The Gateway Endpoint Settings dialog box appears. The Branch Office VPN configuration page appears. On the Firebox, configure a Branch Office VPN (BOVPN) connection: This diagram shows the topology for a BOVPN connection between a Firebox and a Check Point device. WatchGuard Firebox T55-W with Fireware v12.6.4.
The hardware and software used in this guide include:
0 kommentar(er)
